My AccountB7 Studs
Click image to enlarge
B7 Studs are an externally threaded fastener without a head that is threaded over its entire length. B7 studs are best suited for use in temperatures between 300°- 400°C.
Narrow Your Results By:
-
Fasteners
- Adhesives
-
Anchors
- Concrete Screws
- Conical Plastic Anchors
- Drop In Anchors
- Expansion Shield Anchor
- Eye Couplings
- EZ Anchor
- Hammer Drive Anchors
- Hollow Wall Anchors
- Lag Screw Shield
- Machine Screw Anchors
- Nylon Nail Anchor
- Sleeve Anchors
- Sleeve Type Rod Hangers Zinc
- Toggle Bolt & Wings
- U Drive
-
Wedge Anchors
- Wedge Anchors Zinc (Inch)
- Ramset Trubolt Wedge Anchor, Zinc (Inch)
- Ultrawedge+, Wedge Anchor Zinc, ICC Cracked & Uncracked Concrete / Miami Dade Approved (Inch)
- Ultrawedge, Wedge Anchor, 304 Stainless Steel (Inch)
- Ultrawedge, Wedge Anchor, 316 Stainless Steel (Inch)
- Ultrawedge, Wedge Anchor, Steel, Galvanized (Inch)
- Wood Screw Anchors
-
Bolts
- Anchor Bolts
-
Carriage Bolts
- A307 Grade A Carriage Bolt, Galvanized (Inch)
- A307 Grade A Carriage Bolt, Plain (Inch)
- A307 Grade A Carriage Bolt, Yellow Zinc (Inch)
- A307 Grade A Carriage Bolt, Zinc (Inch)
- Metric Class 4.6 Carriage Bolt, Din 603, Zinc
- Grade 5 Carriage Bolt, Galvanized (Inch)
- Grade 5 Carriage Bolt, Plain (Inch)
- Grade 5 Carriage Bolt, Yellow Zinc (Inch)
- Grade 5 Carriage Bolt, Zinc (Inch)
- Stainless 18-8 Carriage Bolt (Inch)
- Elevator Bolts
- Eye Bolts
- Flange Screws
- Hanger Bolt
-
Hex Bolts
- Grade B7 Heavy Hex Bolt, A193/SA 193, Plain (Inch)
- A307 Grade B Heavy Hex Bolt, Galvanized (Inch)
- A307 Grade B Heavy Hex Bolt, Plain (Inch)
- A307 Grade B Heavy Hex Bolt, Zinc (Inch)
- USA Grade 5 Heavy Hex Bolt, Plain (Inch)
- A307 Grade A Hex Bolt, Galvanized (Inch)
- A307 Grade A Hex Bolt, Plain (Inch)
- A307 Grade A Hex Bolt, Yellow Zinc (Inch)
- A307 Grade A Hex Bolt, Zinc (Inch)
- USA Grade 8 Heavy Hex Bolt, Plain (Inch)
- USA Grade 8 Hex Bolt, Plain (Inch)
- Lag Screws
-
Plow Bolts
- Grade 5 Clip Head Plow Bolt, Plain (Inch)
- PKG (LB) Grade 5 Clip Head Plow Bolt, Zinc (25lb Kegs) (Inch)
- Grade 5 Clip Head Plow Bolt, Zinc (Inch)
- Grade 5 Clip Head Plow Bolt w/ Hex Nut, Zinc (Inch)
- PKG (LB) Grade 5 Elliptical Head Plow Bolt, Zinc (25lb Kegs) (Inch)
- Grade 5 Elliptical Head Plow Bolt, Zinc (Inch)
- Grade 5 No.3 Head Plow Bolt, Plain (Inch)
- Grade 5 No.3 Head Plow Bolt, Zinc (Inch)
- Dome Head Plow Bolt 170,000 PSI, Plain (Inch)
- Grade 5 Plow Bolt w/ Hex Nut, Zinc (Inch)
- Square Head Bolts
- Step Bolts
- Stove Bolt
-
Structural Bolts
- A325 Hex Structural Bolt w/ A563 C Hex Nut, Galvanized (Inch)
- A325 Hex Structural Bolt w/ A563 C Hex Nut, Plain (Inch)
- A325 Heavy Hex Structural Bolt, Type 1, Galvanized (Inch)
- A325 Heavy Hex Structural Bolt, Type 1, Plain (Inch)
- A490 Heavy Hex Structural Bolt, Type 1, Plain (Inch)
- A325 Tension Control Bolt Plain w/ A563 DH Hvy Hex Nut & F436 Washer (Inch)
- A490 Tension Control Bolt Plain w/ A563 DH Hvy Hex Nut & F436 Washer (Inch)
- USA A325 Heavy Hex Structural Bolt, Type 1, Galvanized (Inch)
- USA A325 Heavy Hex Structural Bolt, Type 1, Plain (Inch)
- USA A490 Heavy Hex Structural Bolt, Type 1, Plain (Inch)
- USA A325 Tension Control Bolt Plain w/ A563 DH Hvy Hex Nut & F436 Washer (Inch)
- USA A490 Tension Control Bolt Plain w/ A563 DH Hvy Hex Nut & F436 Washer (Inch)
- Tap Bolts
- Timber Bolts
- Toggle Bolts
-
Hex Cap Screws
- Grade 2 Hex Cap Screws
-
Grade 5 & 8.8 Hex Head Cap Screws
- Grade 5 Hex Head Cap Screw, Galvanized (Inch)
- Grade 5 Hex Head Cap Screw, Plain (Inch)
- Grade 5 Hex Head Cap Screw, Plain (Inch)(China)
- Grade 5 Hex Head Cap Screw, Yellow Zinc (Inch)
- Grade 5 Hex Head Cap Screw, Zinc (Inch)
- Grade 5 Hex Head Cap Screw, Zinc (Inch)(China)
- Grade 5 Hex Head Cap Screw, Zinc JS500 (Inch)
- Metric Class 8.8 Hex Head Screw, Din 933/Din 961, Plain
- Metric Class 8.8 Hex Head Bolt, Din 931/Din 960, Plain
- Metric Class 8.8 Hex Head Bolt/Screw, Din 931 / 933 / 960 / 961, Zinc
- USA Grade 5 Hex Head Cap Screw, Plain (Inch)
- USA Grade 5 Hex Head Cap Screw, Zinc (Inch)
-
Grade 8 & 10.9 Hex Cap Screws
- Grade 8 Hex Cap Screw, Plain (Inch)
- Grade 8 Hex Cap Screw, Yellow Zinc Bake (Inch)
- Metric Class 10.9 ASME Hex Head Screw, Plain
- Metric Class 10.9 Hex Head Bolt, Din 931/960, Plain
- Metric Class 10.9 Hex Head Bolt/Screw, Din 931/933, Zinc
- Metric Class 10.9 Hex Head Screw, Din 933/961, Plain
- Metric Class 10.9 Hex Head Screw, Yellow Zinc
- USA Grade 8 Hex Cap Screw, Nylon Patch, Yellow Zinc (Inch)
- USA Grade 8 Hex Cap Screw, Plain (Inch)
- USA Grade 8 Hex Cap Screw, Yellow Zinc Bake (Inch)
-
Stainless Hex Cap Screws
- Metric Stainless A2 70 Hex Head Bolt/Screw, Din 931/933
- Metric Stainless A4 70 Hex Head Screw, Din 931
- Metric Stainless A4 70 Hex Head Screw, Din 933
- Stainless 18-8 Hex Head Cap Screw (Inch) ASTM F593
- Stainless 18-8 Hex Head Cap Screw, Fully Threaded (Inch) ASTM F593
- Stainless 316 Hex Cap Screw (Inch) ASTM F593
- Keys
-
L9
- L9
-
PFC 9
- USA PFC 9, Hex All Metal Locknut, Cadmium Yellow & Wax (Inch)
- USA PFC 9, Hex Cap Screw w/ Hex Nut & 2 SAE Washers, Yellow Zinc (Inch)
- USA PFC 9, Hex Cap Screw, Yellow Zinc (Inch)
- USA PFC 9, Hex Nut, Yellow Zinc (Inch)
- USA PFC 9, SAE Flat Washer, Yellow Zinc (Inch)
- USA PFC 9 Thick Nut, NC (Inch)
- USA PFC 9, USS Flat Washer, Yellow Zinc (Inch)
-
Pins
- Cotter Pins
- Clevis Pins
-
Dowel Pins
- Dowel Pin, Through Hardened, Plain, Alloy (Inch)
- Dowel Pin, Through Hardened, .001 Oversize Plain, Alloy (Inch)
- Dowel Pin, Through Hardened, Pull Out, Plain, Alloy (Inch)
- Metric Dowel Pin, Through Hardened, Din 6325, Plain, Alloy
- Metric Dowel Pin, Through Hardened, Pull Out, Din 7979D, Plain, Alloy
- Metric Stainless A2 Dowel Pin, Din 7
- Metric Stainless A4 Dowel Pin, Din 7
- Stainless 18-8 Dowel Pin (Inch)
- Stainless 316 Dowel Pin (Inch)
- Stainless 416 Dowel Pin (Inch)
- Spring Pins
-
Nuts
- Acorn Nuts
-
All Metal Locknuts
- External Tooth Keps Hex Locknut, Zinc (Inch)
- Flexloc, Full Height Locknut, Plain (Inch)
- Flexloc, Full Height Locknut, Cadmium (Inch)
- Grade A, Reversible Hex Locknut, Zinc (Inch)
- Grade C Hex All Metal Cone Locknut, Zinc & Waxed (Inch)
- Grade C Hex All Metal Cone Locknut, Zinc & Waxed (Inch), Taiwan
- Grade G, Hex Flange Cone Locknut w/o Serration, Phos & Oil (Inch)
- Metric Class 10 All Metal Locknut, Din 980 V, Zinc & Waxed
- Metric Class 8 All Metal Locknut, Din 980 V, Zinc & Waxed
- Metric Class 8 External Tooth Keps Hex Locknut, Zinc
- Metric Class 8 Prevailing Torque Hex Flange Locknut, Din 6927, Zinc
- Serrated Flange Hex Locknut, Case Hardened, Zinc (Inch)
- Coupling Nuts
-
Finished Hex Nuts
- Finished Hex Nut, Brass (Inch)
- Grade 2 Hex Nut, Galvanized (Inch)
- Grade 2 Hex Nut, Plain (Inch)
- Grade 2 Hex Nut, Yellow Zinc (Inch)
- Grade 2 Hex Nut, Taiwan, Zinc (Inch)
- Grade 5 Hex Nut, Plain (Inch)
- Grade 5 Hex Nut, Yellow Zinc (Inch)
- Grade 5 Hex Nut, Zinc (Inch)
- Grade 8 Hex Nut, Plain (Inch)
- Grade 8 Hex Nut, Yellow Zinc (Inch)
- Grade 8 Hex Nut, Zinc Bake (Inch)
- Grade 8 High Nut, Hardened, Plain (Inch)
- Left Hand, Finished Hex Nut, Plain (Inch)
- Left Hand, Finished Hex Nut, Zinc (Inch)
- Metric Class 10 Hex Nut, Din 934, Plain
- Metric Class 10 Hex Nut, Din 934, Yellow Zinc
- Metric Class 10 Hex Nut, Din 934, Zinc
- Metric Class 6 Hex Nut, Din 934, Plain
- Metric Class 6 Hex Nut, Din 934, Zinc
- Metric Class 8 Hex Nut, Din 934, Plain
- Metric Class 8 Hex Nut, Din 934, Yellow Zinc
- Metric Class 8 Hex Nut, Din 934, Zinc
- USA Grade 5 Hex Nut, Plain (Inch)
- USA Grade 5 Hex Nut, Zinc (Inch)
- USA Grade 8 Hex Nut, Plain (Inch)
- USA Grade 8 Hex Nut, Yellow Zinc (Inch)
-
Hex Jam Nuts
- Finished Hex Jam Nut, Galvanized (Inch)
- Finished Hex Jam Nut, Plain (Inch)
- Finished Hex Jam Nut, Yellow Zinc (Inch)
- Finished Hex Jam Nut, Zinc (Inch)
- A563 Grade A Heavy Hex Jam Nut, Plain (Inch)
- A563 Grade A Heavy Hex Jam Nut, Zinc (Inch)
- Hex Panel Nut, Zinc (Inch)
- Metric Class 4 Hex Jam Nut, Din 439b, Zinc
- Machine Screw Nuts
- Metric Flange Nuts
-
Nylon Insert Locknuts
- Grade A Nylon Insert Locknut, J500 (Inch)
- Grade A Nylon Insert Locknut, Yellow Zinc (Inch)
- Grade A Nylon Insert Locknut, Zinc (Inch)
- Grade C Nylon Insert Locknut, NE, Phosphate & Oil (Inch)
- Grade C Nylon Insert Locknut, NE, Yellow Zinc (Inch)
- Grade C Nylon Insert Locknut, Plain (Inch)
- Metric Class 10 Nylon Insert Locknut, Zinc
- Metric Class 8 Nylon Insert Locknut, Yellow Zinc
- Metric Class 8 Nylon Insert Locknut, Zinc
- Slotted Hex Nuts
- Speed Nut
- Square Nuts
- Stainless Coupling Nuts
-
Stainless Hex Nuts
- Metric Stainless A2 70 Hex Nut, Din 934
- Metric Stainless A2 Hex Jam Nut, Din 439B
- Metric Stainless A4 70 Hex Nut, Din 934
- Metric Stainless A4 80 Hex Nut, Din 934
- Metric Stainless A4 Hex Jam Nut, Din 439B
- Stainless 18-8 Grade 8, Heavy Hex Nut, ASTM A194 (Inch)
- Stainless 18-8 Heavy Hex Nut (Inch)
- Stainless 18-8 Hex Jam Nut (Inch)
- Stainless 18-8 Hex Machine Screw Nut (inch)
- Stainless 18-8 Hex Nut (Inch) ASTM F594
- Stainless 316 Grade 8M, Heavy Hex Nut, ASTM A194 (Inch)
- Stainless 316 Heavy Hex Nut (Inch)
- Stainless 316 Hex Jam Nut (Inch)
- Stainless 316 Hex Machine Screw Nut (Inch)
- Stainless 316 Hex Nut (Inch) ASTM F594
-
Stainless Locknuts
- Metric Stainless A2 70 Nylon Insert Locknut, Din 985
- Metric Stainless A4 70 Nylon Insert Locknut, Din 985
- Metric Stainless A4 80 Nylon Insert Locknut, Din 986
- Stainless 18-8 Flexloc, Full Height Locknut (Inch)
- Stainless 18-8 Hex Flange Nut, Serrated (Inch)
- Stainless 18-8 Keps Locknut (Inch)
- Stainless 18-8 Nylon Insert Locknut (Inch)
- Stainless 316 Hex Flange Nut, Serrated (Inch)
- Stainless 316 Nylon Insert Locknut (Inch)
-
Structural And Heavy Hex Nuts
- 2H Heavy Hex Nut, A194/SA 194, Galvanized (Inch)
- 2H Heavy Hex Nut, A194/SA 194, Plain (Inch)
- 2H Heavy Hex Nut, A194/SA 194, Plain (Inch), Taiwan/Korea
- 2H Heavy Hex Nut, A194/SA 194, Zinc (Inch)
- A563 Grade A Heavy Hex Nut, Galvanized (Inch)
- A563 Grade A Heavy Hex Nut, Plain (Inch)
- A563 Grade A Heavy Hex Nut, Yellow Zinc (Inch)
- A563 Grade A Heavy Hex Nut, Zinc (Inch)
- A563 Grade C Heavy Hex Nut, Plain (Inch)
- A563 Grade C Heavy Hex Nut, Zinc (Inch)
- A563 Grade DH Heavy Hex Nut, Galvanized & Blue Wax (Inch)
- A563 Grade DH Heavy Hex Nut, Plain (Inch)
- USA 2H Heavy Hex Nut, A194/SA 194, Galvanized & Blue Wax (Inch)
- USA 2H Heavy Hex Nut, A194/SA 194, Plain (Inch)
- USA A563 Grade C Heavy Hex Nut, Plain (Inch)
- USA A563 Grade DH Heavy Hex Nut, Galvanized & Wax (Inch)
- USA A563 Grade DH Heavy Hex Nut, Plain (Inch)
- Tee Nuts
-
Weld Nut
- Headed Weld Stud w/ Ferrule
- Hex Weld Nut, Long Pilot, 3 Projections, Plain (Inch & Metric)
- Hex Weld Nut, Long Pilot, 6 Projections, Plain (Inch & Metric)
- Hex Weld Nut, Short Pilot, 3 Projections, Plain (Inch & Metric)
- Hex Weld Nut, Short Pilot, 6 Projections, Plain (Inch & Metric)
- Metric Hex Weld Nut, Din 929, Plain
- Retainer Weld Nut (Inch)
- Spot Weld Nut, 4 Projection (Inch & Metric)
- Spot Weld Nut, Double Tab (Inch & Metric)
- Spot Weld Nut, Dual Rib Projection (Inch & Metric)
- Spot Weld Nut, Single Tab (Inch & Metric)
- Spot Weld Nut, Single Tab, Single Projection (Inch & Metric)
- Spot Weld Nut, Single Tab, with Target (Inch & Metric)
- Wheel Nuts
- Wing Nuts
- Riveting Products
-
Rods And Studs
- B7 Studs
-
Threaded Rods
- A307 Grade A Threaded Rod, Galvanized (Inch)
- A307 Grade A Threaded Rod, Plain (Inch)
- A307 Grade A Threaded Rod, Zinc (Inch)
- F1554 Grade 36 Threaded Rod, Plain (Inch)
- Grade B7 Threaded Rod, A193/SA 193, Plain (Inch)
- Metric Stainless A2 Threaded Rod, Din 975
- Metric Threaded Rod, Din 975, Zinc
- Stainless 304 B8 Threaded Rod, Astm A193 (Inch)
- Stainless 304 Threaded Rod, ASTM F593 (Inch)
- Stainless 316 B8M Threaded Rod, Astm A193 (Inch)
- Stainless 316 Threaded Rod, ASTM F593 (Inch)
- Unthreaded Rods
-
Screws
-
Construction Screws
- Deck Screw, Type S, Dacrotized, Low Carbon (Inch)
- K Lath Modified Truss, Sharp Point, Zinc (Inch)
- Particle Board Screw, Phillips Flat, Black Phosphate, Hardened (Inch)
- Particle Board Screw, Square Flat, Black Phosphate, Hardened (Inch)
- Particle Board Screws, Phillips Flat, Zinc (Inch)
- Particle Board Screws, Plain, Hardened (Inch)
- Self Piercing Screw, Zinc (Inch)
- Square Drive Bugle Head Deck Screw, Phosphate, Hardened (Inch)
- Square Drive Bugle Head Deck Screw, Yellow Zinc, Hardened (Inch)
- Trim Screws, Plain (Inch)
- Drive Screws
-
Drywall Screws
- Drywall Screw, K Lath Phillips Twinfast, Zinc (Inch)
- Drywall Screw, Phillips Bugle Head, Gray Phosphated (Inch)
- Drywall Screw, Phillips Bugle Head, Type S, Yellow Zinc (Inch)
- Drywall Screw, Phillips Bugle Head, Zinc (Inch)
- Proferred Drywall Screws Gray Phosphated (Inch)
- Proferred Drywall Screws, Phillips Bugle, Yellow Zinc (Inch)
- Taiwan Proferred Drywall Screw, Phillips Bugle, Yellow Zinc (Inch)
- Lag Screws
-
Machine Screws
- Machine Screw, Slotted Binder Undercut, Zinc (Inch)
- Machine Screw, Brass (Inch)
- Machine Screw, Slotted Fillister, Zinc (Inch)
- Machine Screw, Phillips Flat, Zinc (Inch)
- Machine Screw, Slotted Flat, Zinc (Inch)
- Machine Screw, Hex Slotted/No Washer Head, Zinc (Inch)
- Machine Screw, Unslotted Indented Hex Head, Zinc (Inch)
- Machine Screw, Unslotted Indented Hex Washer Head, Zinc (Inch)
- Machine Screw, Slotted Indented Hex Washer Head, Zinc (Inch)
- Machine Screw, Phillips Oval, Zinc (Inch)
- Machine Screw, Slotted Oval, Zinc (Inch)
- Machine Screw, Phillips Pan, Sems, Zinc (Inch)
- Machine Screw, Phillips Pan, Zinc (Inch)
- Machine Screw, Slotted Pan, Zinc (Inch)
- Machine Screw, Plain (Inch)
- Machine Screw, Phillips Round, Zinc (Inch)
- Machine Screw, Phillips/Slotted Combo Round, Zinc (Inch)
- Machine Screw, Slotted Round, Zinc (Inch)
- Machine Screw, Phillips Truss, Zinc (Inch)
- Machine Screw, Phillips/Slotted Combo Truss, Zinc (Inch)
- Machine Screw, Slotted Truss, Zinc (Inch)
- Metric Class 4.8 Machine Screw, Phillips Flat, Din 965A, Zinc
- Metric Class 4.8 Machine Screw, Slotted Flat, Zinc
- Metric Class 4.8 Machine Screw, Phillips Pan, Din 7985A, Zinc
- Metric Class 4.8 Machine Screw, Phillips Pan, Sems, Zinc
- Metric Class 4.8 Machine Screw, Slotted Pan, Zinc
- Slotted Flat Countersunk Head Cap Screw, Plain, Low Carbon (Inch)
- Thumb Screw, Type A w/ Shoulder, Zinc (Inch)
- Thumb Screw, Type B No Shoulder, Zinc (Inch)
-
Machine Screws (stainless)
- Metric Stainless A2 Machine Screw, Phillips Flat Head
- Metric Stainless A2 Machine Screw, Phillips Pan Head
- Stainless 18-8 Machine Screw, 6 Lobe Flat Head (Inch)
- Stainless 18-8 Machine Screw, 6 Lobe Pan Head (Inch)
- Machine Screw, Flat Slotted, Stainless Steel 18 8 (inch)
- Stainless 18-8 Machine Screw, Indented Hex Washer Head, Slotted (Inch)
- Machine Screw, Pan Slotted, Stainless Steel 18 8 (inch)
- Stainless 18-8 Machine Screw, Phillips Fillister Head (Inch)
- Machine Screw, Phillips Flat Head, Stainless Steel 18 8 (inch)
- Machine Screw, Phillips Oval Head, Stainless Steel 18 8 (inch)
- Machine Screw, Phillips Pan Head, Stainless Steel 18 8 (inch)
- Machine Screw, Phillips Truss Head, Stainless Steel 18 8 (inch)
- Machine Screw, Round Slotted, Stainless Steel 18 8 (inch)
- Stainless 18-8 Machine Screw, Square Pan Head (Inch)
- Stainless 18-8 Machine Screw, Trimmed Hex Head (Inch)
- Stainless 316 Machine Screw, Phillips Flat Head (Inch)
- Stainless 316 Machine Screw, Phillips Oval Head (Inch)
- Stainless 316 Machine Screw, Phillips Pan Head (Inch)
- Stainless 316 Machine Screw, Phillips Truss Head (Inch)
- Stainless 316 Machine Screw, Trimmed Hex Head (Inch)
-
Proferred Screws (Drywall And Self Drilling)
- Taiwan Proferred Drywall Screw Black Phosphated (Inch)
- Taiwan Proferred Drywall Screw, Phillips Bugle, Yellow Zinc (Inch)
- Proferred Drywall Screw, Black Phosphated (Inch)
- Proferred Drywall Screw, Phillips Bugle, Yellow Zinc (Inch)
- Proferred Drywall Screw, Phillips Bugle Head, Gray Phosphated (Inch)
- PKG (LB) Proferred Drywallerz, Drywall Screw, Gray Phosphated (Inch)
- PKG (LB) Proferred Self Drill, Self Drilling Screw, Gray Phosphated (Inch)
- PKG (LB) Proferred Self Drill, Self Drilling Screw, Zinc
- Proferred Drywall Self Drilling Screw, Gray Phosphated (Inch)
- Proferred Self Drilling Screw w/ Bonded Washer, Zinc (Inch)
- Proferred Self Drilling Screw, Pan Framing, Phosphated (Inch)
- Proferred Self Drilling Screw, Zinc (Inch)
-
Self Drilling Screws
- Proferred Self Drilling Screw, Gray Phosphated (Inch)
- Proferred Self Drilling Screw w/ Bonded Washer, Zinc (Inch)
- Proferred Self Drilling Screws, Pan, Framing, Phosphated (Inch)
- Proferred Self Drilling Screw, Zinc (Inch)
- Self Drilling Drywall Screw, Phosphate (Inch)
- Self Drilling Drywall Screw, Zinc (Inch)
- Teks Self Drilling Screw, Bulk Climaseal (Inch)
- Self Drilling Screw, Unslotted Hex Washer Head w/ Bonded Washer, Zinc (Inch)
- Self Drilling Screw, Zinc (Inch)
- Teks/2, Self Drilling Screw, Zinc (Inch)
- Trugrip GT, Hex Washer Head, Metal To Wood, Climaseal (Inch)
- Self Drilling Screws (Stainless)
-
Self Tapping Screws
- Floorboard Thread Cutting Screw, Type F, Phosphate (Inch)
- Tapping Screw, Type A, Zinc (Inch)
- Tapping Screw, Type AB, Zinc (Inch)
- Tapping Screw, Type B, Zinc (Inch)
- Thread Cutting Screws, Slotted Pan, Type F, Zinc (Inch)
- Thread Cutting Screw, Type 23(T), Zinc (Inch)
- Thread Cutting Screw, Type 25(BT), Zinc (Inch)
- Thread Cutting Screw, Type F, Zinc (Inch)
- Thread Rolling Screw, Zinc & Waxed (Inch)
-
Self Tapping Screws Type A (Stainless)
- Stainless 18-8 Self Tapping Screw, Phillips Flat (Inch)
- Stainless 18-8 Self Tapping Screw, Phillips Oval (Inch)
- Stainless 18-8 Self Tapping Screw, Phillips Pan (Inch)
- Stainless 18-8 Self Tapping Screw, Phillips Truss (Inch)
- Stainless 18-8 Self Tapping Screw, Slotted Indented Hex Washer (Inch)
- Stainless 18-8 Self Tapping Screw, Type A, Square Flat Head (Inch)
- Stainless 18-8 Self Tapping Screw, Type A, Square Pan Head (Inch)
- Stainless 18-8 Self Tapping Screw, Type A, Square Truss Head (Inch)
- Stainless 18-8 Self Tapping Screw, Type AB (Inch)
- Stainless 316 Self Tapping Screw, Type A, Phillips Flat Head (Inch)
- Stainless 316 Self Tapping Screw, Type A, Phillips Oval Head (Inch)
- Stainless 316 Self Tapping Screw, Type A, Phillips Pan Head (Inch)
- Stainless 316 Self Tapping Screw, Type A, Phillips Truss Head (Inch)
- Stainless 316 Self Tapping Screw, Type A, Slotted Indented Hex Washer Head (Inch)
-
Wood Screws
- PKG (LB) Phillips Combo Drive Deck Screw, Green, ACQ Compatible (Inch)
- PKG (LB) Phillips Combo Drive Deck Screw, Red, ACQ Compatible (Inch)
- PKG (LB) Phillips Combo Drive Deck Screw, Tan, ACQ Compatible (Inch)
- PKG (LB) Phillips Square Combo, Compsite Screw (Inch)
- PKG (LB) Woodex Screw, Square Flat, Plated (Inch)
- Wood Screw Stainless Steel 18-8 (Inch)
- Wood Screw, Brass (Inch)
- Wood Screw, Chrome (Inch)
- Wood Screw, Zinc (Inch)
- Wood Screw, Plain (Inch)
- Woodex Screw, Square Flat, Plated (Inch)
-
Construction Screws
-
Socket Screws
- Brass Tip Set Screws
-
Button Socket Cap
- Button Socket Cap Screw, Thermal Black Oxide, Alloy (Inch)
- Button Socket Cap Screw, Zinc Bake, Alloy (Inch)
- Button Socket Cap Screw, Mechanical Zinc, Alloy (Inch)
- Button Socket Cap Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Button Socket Cap Screw, Nylon Pellet, Thermal Black Oxide, Alloy (Inch)
- Button Socket Cap Screw, Tamper Resistant, Thermal Black Oxide, Alloy (Inch)
- Button Socket Cap Screw, Stainless Steel 18-8 (Inch)
- Button Socket Cap Screw, Tamper Resistant, Stainless Steel 18-8 (Inch)
- Metric Class 12.9 Button Socket Cap Screw, ISO 7380, Thermal Black Oxide
- Metric Class 12.9 Button Socket Cap Screw, ISO 7380, Zinc Bake
- Metric Stainless A2 Button Socket Cap Screw, ISO 7380
- Cone Point Set Screws
-
Cup Point Set Screws
- Cup Point Socket Set Screw, Thermal Black Oxide, Alloy (Inch)
- Cup Point Socket Set Screw, Zinc Bake, Alloy (Inch)
- Cup Point Socket Set Screw, Mechnical Zinc, Alloy (Inch)
- Cup Point Socket Set Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Cup Point Socket Set Screw, Nylon Pellet, Thermal Black Oxide, Alloy (Inch)
- Cup Point Socket Set Screw, Stainless Steel 18-8 (Inch)
- Cup Point Socket Set Screw, Nylon Patch, Stainless Steel 18-8 (Inch)
- Cup Point Socket Set Screw, Stainless Steel 316 (Inch)
- Cup Point Socket Set Screw, Ni Cu Alloy, Plain (Inch)
- Cup Point Socket Set Screw, Brass (Inch)
- USA Locking Socket Jam Screw, Plain Alloy HRC 45 53 (Inch)
- Metric Cup Point Socket Set Screw, 45H ISO 4029/Din 916, Thermal Black Oxide
- Metric Cup Point Socket Set Screw, 45H ISO 4029/Din 916, Zinc Bake
- Metric Stainless A2 Cup Point Socket Set Screw, Din 916
-
Dog Set Screws
- Half Dog Socket Set Screw, Thermal Black Oxide, Alloy (Inch)
- Half Dog Socket Set Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Half Dog Socket Set Screw, Stainless Steel 18-8 (Inch)
- Full Dog Point Socket Set Screw, Thermal Black Oxide, Alloy (Inch)
- Metric Dog Point Socket Set Screw, 45H ISO 4028/Din 915, Thermal Black Oxide
- Flat Point Set Screws
-
Flat Socket Cap
- Flat Socket Cap Screw, Thermal Black Oxide, Alloy (Inch)
- Flat Socket Cap Screw, Zinc Bake, Alloy (Inch)
- Flat Socket Cap Screw, Mechanical Zinc, Alloy (Inch)
- Flat Socket Cap Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Flat Socket Cap Screw, Nylon Pellet, Black Alloy (Inch)
- Flat Socket Cap Screw, Tamper Resistant, Thermal Black Oxide, Alloy (Inch)
- Flat Socket Cap Screw, Stainless Steel 18-8 (Inch)
- Flat Socket Cap Screw, Tamper Resistant, Stainless Steel 18-8 (Inch)
- Flat Socket Cap Screw, Thermal Black Oxide (USA)(Inch)
- Metric Class 10.9 Flat Socket Cap Screw, ISO 10642, Thermal Black Oxide
- Metric Class 12.9 Flat Socket Cap Screw, Din 7991, Thermal Black Oxide
- Metric Class 12.9 Flat Socket Cap Screw, Din 7991, Zinc Bake
- Metric Class 12.9 Flat Socket Cap Screw, Din 7991, Zinc
- Metric Stainless A2 Flat Socket Cap Screw, Din 7991
- Knurl Cup Set Screws
-
Low Head Socket Cap
- Low Head Socket Cap Screw, Thermal Black Oxide (Inch)
- Metric Class 10.9 Low Head Socket Cap Screw, Din 7984, Thermal Black Oxide
- Metric Stainless A2 Low Head Socket Cap Screw, Din 7984
- Metric Class 10.9 Low Head Socket Cap Screw, SIP 147, Thermal Black Oxide
- Metric Class 8.8 Low Head Socket Cap Screw, Din 7984, Thermal Black Oxide
- Nylon Tip Set Screws
- Oval Point Set Screws
- Pipe Plugs
- Slotted Set Screws
-
Socket Head Cap Screws
- Socket Head Cap Screw, Thermal Black Oxide, Alloy (Inch)
- Socket Head Cap Screw, 1936 Series, Thermal Black Oxide, Alloy (Inch)
- Socket Head Cap Screw, Zinc Bake, Alloy (Inch)
- Socket Head Cap Screw, Mechanical Zinc, Alloy (Inch)
- Socket Head Cap Screw, Yellow Zinc (Inch)
- Socket Head Cap Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Socket Head Cap Screw, Nylon Pellet, Thermal Black Oxide, Alloy (Inch)
- Socket Head Cap Screw, Tamper Resistant, Thermal Black Oxide, Alloy (Inch)
- Socket Head Cap Screw, Whitworth Thread, Thermal Black Oxide Alloy (Inch)
- Socket Head Cap Screw, Stainless Steel 18-8 (Inch)
- Socket Head Cap Screw, Nylon Patch, Stainless Steel 18-8 (Inch)
- Socket Head Cap Screw, Tamper Resistant, Stainless Steel 18-8 (Inch)
- Socket Head Cap Screw, Stainless Steel 316 (Inch)
- Socket Head Cap Screw, Ni Cu, Plain (Inch)
- Socket Head Cap Screw, Silicon Bronze, Plain (Inch)
- Metric Class 8.8 Socket Cap Screw, Din 912, Thermal Black Oxide
- Metric Class 12.9 Socket Cap Screw, Din 912/ISO 4762, Thermal Black Oxide
- Metric Class 12.9 Socket Cap Screw, Din 912/ISO 4762, Zinc Bake
- Metric Class 12.9 Socket Cap Screw, Din 912, Zinc Bake
- Metric Stainless A2 Socket Cap Screw, Din 912
-
Socket Shoulder Cap Screws
- Socket Shoulder Screw, Thermal Black Oxide, Alloy (Inch)
- Socket Shoulder Screw, Nylon Patch, Thermal Black Oxide, Alloy (Inch)
- Socket Shoulder Screw, Nylon Pellet, Thermal Black Oxide, Alloy (Inch)
- Socket Shoulder Screws, Stainless Steel 18-8 (Inch)
- Metric Class 12.9 Socket Shoulder Screw, ISO 7379, Thermal Black Oxide, Alloy
-
Square Head Set Screws
-
Square Head Set Screws
- Cup Point Square Head Set Screw, Case Hardened, Plain (Inch)
- Cup Point Square Head Set Screw, Case Hardened, Fine Thread, Plain (Inch)
- 1/2 Dog Point Square Head Set Screw, Case Hardened, Plain (Inch)
- Flat Point Square Head Set Screw, Case Hardened, Plain (Inch)
- Cone Point Square Head Set Screw, Case Hardened, Plain (Inch)
- Oval Point Square Head Set Screw, Case Hardened Plain (Inch)
- Cup Point Square Head Set Screw, Plain (Inch)
- Stainless 18-8 Cup Point Square Head Set Screw (Inch)
-
Square Head Set Screws
-
Washers
- Countersunk Finishing Washers
-
Flat Washers
- USS Flat Washer, Plain (Inch)
- USS Flat Washer, Zinc (Inch)
- USS Flat Washer, Yellow Zinc (Inch)
- USS Flat Washer, Galvanized (Inch)
- SAE Flat Washer, Plain (Inch)
- SAE Flat Washer, Zinc (Inch)
- SAE Flat Washer, Yellow Zinc (Inch)
- SAE Flat Washer, Galvanized (Inch)
- PKG (PCS) USS Flat Washer, Plain (Inch)
- PKG (PCS) USS Flat Washer, Zinc (Inch)
- PKG (PCS) USS Flat Washer, Galvanized (Inch)
- PKG (PCS) SAE Flat Washer, Plain (Inch)
- PKG (PCS) SAE Flat Washer, Zinc (Inch)
- Fender Washer, Plain (Inch)
- Fender Washer, Zinc (Inch)
- PKG (PCS) Fender Washer, Zinc (Inch)
- Flat Washer, Solid Brass (Inch)
- Finishing Washer, Stainless Steel 18-8 (Inch)
- Metric Grade A Fender Washer, Din 9021B, Zinc
- Metric Din 125A Flat Washer, 140 HV, Plain
- Metric Din 125A Flat Washer, 140 HV, Zinc
- Metric Din 125A Flat Washer, 140 HV, Yellow Zinc
- Metric Din 125A Flat Washer, 200 HV, Plain
- Metric Din 125A Flat Washer, 200 HV, Zinc
- Metric Din 125A Flat Washer, 200 HV, Yellow Zinc
- Metric Din 7349 Thick Flat Washer, Zinc
- Metric Din 433 Small Flat Washer, Zinc
- Metric Grade C Fender Washer, Din 9021B, Zinc
-
Flat Washers (Stainless)
- Stainless 18-8, Flat Washer, Brighton Best Standard (Inch)
- Stainless 18-8, Flat Washer, Commercial Standard (Inch)
- Stainless 18-8, Flat Washer, Fender Standard (Inch)
- Stainless 18-8, Flat Washer, AN960 (Inch)
- Stainless 18-8, Flat Washer, MS15795 (Inch)
- Stainless 18-8, Flat Washer, NAS620 (Inch)
- Stainless 18-8, Flat Washer, N400 (Inch)
- Stainless 18-8, Flat Washer, AN960L (Inch)
- Stainless 316, Flat Washer, Commercial Standard (Inch)
- SAE Flat Washer, Stainless Steel 18-8 (inch)
- SAE Flat Washer, Stainless Steel 316 (Inch)
- Metric Stainless A2 Flat Washer, ASME B18.22M, Narrow
- Metric Stainless A2 Flat Washer, Din 125A
-
Flat Washers (Thru Hardened)
- F436 Structural Flat Washer, Plain (Inch)
- F436 Structural Flat Washer, Yellow Zinc (Inch)
- F436 Structural Flat Washer, Galvanized (Inch)
- USA F436 Structural Flat Washer, Plain (Inch)
- USA F436 Structural Flat Washer, Galvanized (Inch)
- USS Flat Washer (USA), Thru Hardened, Plain (Inch)
- USS Flat Washer, Thru Hardened, Plain (Import) (Inch)
- USS Flat Washer (USA), Thru Hardened, Zinc (Inch)
- USS Flat Washer (USA), Thru Hardened, Yellow Zinc (Inch)
- USS Flat Washer, Thru Hardened, Yellow Zinc (Import) (Inch)
- SAE Flat Washer, Thru Hardened, Plain (Import) (Inch)
- SAE Flat Washer (USA), Thru Hardened, Plain (Inch)
- SAE Flat Washer (USA), Thru Hardened, Zinc (Inch)
- SAE Flat Washer (USA), Thru Hardened, Yellow Zinc (Inch)
- SAE Flat Washer, Thru Hardened, Yellow Zinc (Import) (Inch)
- USA Flat Washer, Extra Heavy, Yellow Zinc (Inch)
- USA Metric Flat Washer, ASME B18.22M, Narrow, Thru Hardened, Zinc Blue
-
Lock Washers
- Split Lock Washer, Regular, Plain (Inch)
- Split Lock Washer, Regular, Zinc (Inch)
- Split Lock Washer, Regular, Alloy, Thru Hardened, Yellow Zinc (Inch)
- Split Lock Washer, Regular, Galvanized (Inch)
- External Tooth Lock Washer, Plain (Inch)
- External Tooth Lock Washer, Zinc (Inch)
- Internal Tooth Lock Washer, Plain (Inch)
- Internal Tooth Lock Washer, Zinc (Inch)
- Internal/External Tooth Lock Washer, Zinc (Inch)
- Metric Split Lock Washer, Thru Hardened, Din 127, Plain
- Metric Split Lock Washer, Din 127B, Yellow Zinc
- Metric External Tooth Lock Washer, Din 6797A, Zinc
- Metric External Tooth Serrated Lock Washer, Din 6798A, Zinc
- Metric Internal Tooth Lock Washer, Din 6797J, Zinc
- Split Lock Washer, Hi Collar, Thru Hardened, Plain (Inch)
- Split Lock Washer, Hi Collar, Thru Hardened, Yellow Zinc (Inch)
- USA Split Lock Washer, Regular, Heat Treated, Plain (Inch)
- Split Lock Washer, Heavy, Thru Hardened, Plain (Inch)
- Split Lock Washer, Regular, Alloy, Plain (Inch)
- Metric Split Lock Washer, Thru Hardened, Din 127B, Zinc
- Metric Hi Collar Lock Washer, Din 7980, Plain
- Split Lock Washers (Stainless)
- Nylon Washer
- Round Malleable Washer